01 / MOUNTED AT HOMEBuild on your existing kit
Solid Mounts turn compatible Beta Blocks into a mounted training setup. Add a pair where you want a dedicated place for your next session.
THE NEXT PIECE OF YOUR SETUP.Some photos show one mount’s components. Each pair kit contains two mounts. Beta Blocks, backing board, and wrench shown are separate.
ACCESSORIES / FOR THE BETA BLOCK SYSTEM
The Solid
Mounts
Give your Beta Blocks a place at home. Add a mounted training setup using the blocks you already own, or create another place to train.
$44.99Pair of Solid Mounts
SOLD AS A PAIR
For Beta Blocks. Blocks and backing board not included.
Pair of Solid Mounts
$44.99
Free U.S. shipping
1 pair · 2 mounts
What comes in the pair kit?
- 2 mount bases
- 2 T-nuts
- 2 Beta Block posts
- 8 mount-to-board screws
- 1 T20 bit
MOUNTSOne pair in every kit
MODULARKeep using your Beta Blocks
ROOM TO GROWAdd another training location
SAME BLOCKS. MORE PLACES TO TRAIN.
Set up at home
Take your blocks along
Rotate or flip a mounted Beta Block to change edges. Remove it when your session takes you elsewhere.
01 / MOUNTED AT HOME
02 / THE BLOCK STILL COMES ALONGKeep the portable side
Your blocks can still leave the mounts for warm-ups and portable training. One Beta Block System, at home and on the go.
Beta Blocks are shown to demonstrate compatibility. They are sold separately from the mount pair.
IN EVERY PAIR KIT
The pair,
part by part
You supply the Beta Blocks and a suitable, securely installed structural backing board. The included screws attach the mounts to the board; board-to-structure fasteners are separate.
- Mount bases
- 2
- T-nuts
- 2
- Beta Block posts
- 2
- Mount-to-board screws
- 8
- T20 bit
- 1
START WITH WHAT YOU HAVE.
The next piece
or the whole setup
Already own Beta Blocks? Add mounts. Starting fresh? Explore the complete hangboard.
FOR THE BLOCKS YOU ALREADY OWNSolid Mounts
Two mounts with their posts, T-nuts, eight mount screws, and a T20 bit. Beta Blocks sold separately.
FOR YOUR FIRST HOME SETUPComplete Hangboard
Two Beta Blocks, two loops, two mounts, eight mount screws, and a T20 bit. Backing board and carabiners separate.
Both options require a suitable backing board and secure installation.
BEFORE YOU BUILD
Plan your
backing board
Solid Mounts attach to an appropriate structural backing board, secured to structural framing or another suitable load-bearing structure. Drywall alone is not a mounting surface.
01
Bring the board
The backing board and its structural fasteners are supplied separately.
02
Have the tools ready
A 14mm wrench or socket is needed for post adjustment and is not included. A T20 bit is included.
03
Check before training
Inspect the parts and mounting points before use. Use fully seated blocks; avoid sudden or impact loading.
A FEW THINGS TO KNOW
Know your
next addition
Is this one mount or a pair?
One pair: two mount bases, two T-nuts, two posts, eight mount-to-board screws, and one T20 bit. Some photos show the components for a single mount.
Are Beta Blocks included?
No. This accessory kit is for Beta Blocks you already own or buy separately. For two blocks, two loops, and the mount pair together, explore the complete Beta Block Hangboard.
Do Solid Mounts fit the Pocket Edge?
No. Solid Mounts work with Beta Blocks. The 20mm Pocket Edge is a separate portable training tool.
Is the backing board included?
No. You provide a suitable structural backing board and the fasteners securing it to the structure. The eight included screws attach the Solid Mounts to that board. Do not install directly into drywall alone.
Can I still use my Beta Blocks away from the mounts?
Yes. Beta Blocks can be removed for portable use, or rotated and flipped to access their edge depths. Follow the installation and adjustment guide so the blocks seat and move correctly.
What should I read before using them?
Read the Solid Mount installation guide and Beta Block use instructions. The system is for training and must not serve as climbing protection or fall-arrest equipment. Inspect the installation and parts each session; leave damaged or unstable equipment out of use.